Good bearings?

Subject: Good bearings? Fri Mar 20, 2009 4:52 am

I was looking for a new bottom bracket with bearings. Preferably sealed. Does anybody know where I can get some good ones cheap? Also if anyone has some to sell, feel free to post those here too.

Subject: Re: Good bearings? Fri Mar 20, 2009 5:03 am

i have 22 mm never been touched spanish i believe

Subject: Re: Good bearings? Fri Mar 20, 2009 5:17 am

Whats the difference between American, Spanish, European?

Subject: Re: Good bearings? Fri Mar 20, 2009 5:32 am

There is a bearing cup on the bb where the bearings go and they are all different sizes.

Subject: Re: Good bearings? Fri Mar 20, 2009 7:38 am

So....how do I know which one will fit mine?

Subject: Re: Good bearings? Fri Mar 20, 2009 9:51 am

Get the stolen bearings

Subject: Re: Good bearings? Fri Mar 20, 2009 10:01 am

bmxchris256 wrote:: Get the stolen bearings

Yes, but how do I know what size to get?

Subject: Re: Good bearings? Fri Mar 20, 2009 10:05 am

find out the specs of your frame and then there is nothing to it after that.

Subject: Re: Good bearings? Fri Mar 20, 2009 10:29 am

Admin wrote:: find out the specs of your frame and then there is nothing to it after that.

I haven't been able to find the specs of my bike, and I've been looking for a few months now. Care to take a second look? If you found it, I would love you. In the most heterosexual way possible.

Subject: Re: Good bearings? Fri Mar 20, 2009 10:42 am

http://www.danscomp.com/456065.php?cat=PARTS this in 19mm spanish should do it

Subject: Re: Good bearings? Fri Mar 20, 2009 11:57 am

Muchos gracias Admin. Bearings solved, going to ask a question about forks now.

Subject: Re: Good bearings? Fri Mar 20, 2009 11:59 am

wait a minute. If you dont have a unsealed crank spindle this will not work. IS your current bottom bracket sealed???

Subject: Re: Good bearings? Fri Mar 20, 2009 12:06 pm

if its a 3pc crank it has the spindle so wouldnt it be fine?

Subject: Re: Good bearings? Fri Mar 20, 2009 12:13 pm

No because unsealed bottom brackets have threaded spindles. You can tighten it or loosen it with this plate that threads onto the spindle. Unsealed spindles are smooth all the way across. You tighten it from the crank bolt.

Subject: Re: Good bearings? Fri Mar 20, 2009 12:25 pm

dang i havent messed with one in forever plus he will have to get a 48 spline i believe so it could be costly.

Subject: Re: Good bearings? Fri Mar 20, 2009 9:38 pm

yeah dude. Unsealed is ballzzz

Subject: Re: Good bearings? Sat Mar 21, 2009 4:20 am

So, I need a new spindle to fit the new bearings? Care to point me in the right direction?

Subject: Re: Good bearings? Sat Mar 21, 2009 4:31 am

Probably a whole new crank setup. I believe you would need a 48 spline spindle and the bearing set and your cranks will be fine as long as they are 3 pc

Subject: Re: Good bearings? Sat Mar 21, 2009 4:34 am

http://www.danscomp.com/455145.php?cat=PARTS that should work then get 19mm spanish sealed bearings